The 289-bed UCSF Medical Center at Mission Bay, which is targeting LEED-gold certification, will include three hospitals:
- The 183-bed UCSF Benioff Children’s Hospital featuring urgent care/emergency department and pediatric primary and specialty outpatient care;
- The 36-bed UCSF women’s specialty hospital featuring cancer care, specialty surgery, a birth center and select women’s ambulatory services;
- The 70-bed UCSF cancer hospital.
“While we are celebrating a very traditional construction milestone, UCSF Medical Center is far from a traditional project,” said George Pfeffer, project executive for DPR Construction. “From the start, UCSF Medical Center wanted to combine an integrated team process with the latest building information modeling tools to produce a much higher level of predictability around the budget, schedule and quality for this project.”
For example, UCSF Medical Center co-located more than 100 members from 19 different companies on-site at the Integrated Center for Design and Construction (ICDC) in May 2009, 20 months prior to groundbreaking, to virtually design and construct the new medical center. The project was broken down into 25,000-square-foot segments, and teams, including the architect of record Stantec, and Arup as the engineer, began working in parallel to virtually create the detailed building information model (BIM). According to Pfeffer, this process and use of BIM helped save approximately $100 million from the project’s budget.
“By using the latest technology through a collaborative and integrated process to design and build our new hospital complex, we’re developing the medical center of the future,” said Stuart Eckblad, director of Design and Construction for the UCSF Mission Bay Hospitals Project. “The combination of children’s, women’s and cancer services at Mission Bay means patients will have high-quality, seamless care at a state-of-the-art facility.”
In addition, the detailed BIM allowed the team to extract material quantities early on in the project with a higher level of certainty. Following are some of the quantities of materials being used in the construction of UCSF Medical Center at Mission Bay:
- 11,000 tons of steel, which is enough to build approximately 7,500 cars;
- 5 million sq. ft. of drywall, which is enough drywall for more than 700 homes averaging 2,000 sq. ft;
- 12,451 light fixtures, enough for 1,000 average size homes;
- 210 miles of conduit, enough to stretch along 3,360 San Francisco city blocks;
- 1,125 miles of wire, enough to round the bases at AT&T Park (home of the San Francisco Giants) 16,500 times;
- 85 miles of piping, equivalent of approximately 50 Golden Gate Bridges put together end to end;
- 1,783,000 pounds of ductwork, approximately 300 Ford F250 trucks (or the same as three empty 747 airplanes);
- 1,069,665 cubic feet per minute (CFM) of air supply, enough capacity to fill an Olympic-sized swimming pool in five seconds.
DPR Construction, currently ranked No. 22 on FORTUNE’S “100 Best Companies to Work For” list, is a forward-thinking national general contractor and construction manager specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and corporate office markets. Founded in 1990, DPR is a privately held, employee-owned company that has grown to a multi-billion-dollar organization with 17 offices around the country, making it one of the largest general contractors in the nation and a great story of entrepreneurial success.
View renderings and more at www.missionbayhospitals.ucsf.edu.